Maintenance of rail clips
The rail clip is an indispensable device on the track, mainly to fasten the rail. There are different types of rail pressing plates according to different use methods, such as cast iron, forging or machining, etc., and they have good compression resistance during use. Even if they are rolled by trains for a long time, the damage caused is small. However, the rail pressure plate is exposed to the outside for a long time, and the pressure plate is related to the safety of the rail operation, and the maintenance of the rail clips device should also be done well.
The rail presser is used as a rail fixture. It is installed along the entire length of the track. One set is set every 500mm or 600mm. One set is two pairs. The symmetrical scenery is on both sides of the track. When the crane is running, it needs to resist the lateral impact from the track. force. In order to ensure the safe operation of the rail and prolong the operating life of the rail system, the maintenance of the rail clips is very important.
Maintenance of the rail clips
1. Select high-quality rail clips. If the operating environment is harsh, use coating protection methods. Galvanized and anti-corrosion coatings can effectively extend the service life of the rail clamps.
2. Regularly check and replace the rail clips that are deformed, failed, damaged, or corroded seriously.
3. For the rail clamp with mild corrosion and rust on the surface, it can be maintained by manual spraying of anti-corrosion coating.
Regarding the maintenance of rail clips, if you have more questions to consult, you can contact GloryRail for technical support. Gloryrail specializes in providing various types of rail presses and track system materials and has rich experience in the new installation, maintenance, and repair of the entire crane rail system. For the maintenance and replacement of some old and outdated track presses, GloryRail can recommend suitable new models for replacement and upgrade according to the model of the track and the use environment, so as to provide the safe and s Save smooth operation of the track.
