GloryRail has more than 20 years of experience in the production of rail clips. 3124 is one of the important models of the GloryRail bolted rail clamp. It has a large volume and uses M24 high-strength bolts, so it can withstand crane rails with large loads. At the same time, the bolt-type rail press is easy to install and use. Many projects use 3124 rail clamps.
The boltable rail clips use bolts to directly fix the rail presser on the bottom plate or H-beam. The installation method is simple and easy to operate. At the same time, different load force models can handle the installation of various types of rails. Compared with the welded type rail, the lifting rail system with a light load will use bolted rail clips.
3124 bolted rail clips introduction
Boltable rail clips 3124 can be installed with 8.8-grade bolts with a maximum load force of 125kN. In some environments that require a larger load force, 10.9-grade bolts can be used to generate a maximum load force of more than 140kN.
The following chart can show the dimensions of the boltable rail clips 3124 and the minimum installation width requirements. You can guide the installation according to the dimensions of the figure. If you need more detailed installation technical support, you can contact GloryRail.
bolted rail clip 3124
The proven design has been used successfully for many years throughout the world. • The clip is bolted to the rail support. No access is required from below. • The two main parts are locked together on tightening the grade 10.9 bolt. • The clip has a self-tightening mechanism. • A special vulcanized rubber block applies a controlled force to the rail.
In order to better serve the different needs of customers, our technical team is available to provide advice and support, helping every customer to optimize their rail selections to minimize life cycle costs. We supply suitable rail parts, like fish plates, rail clips, bolts, and nuts. We supply rail processing, like 45-degree miter cut, welding process, milling process, special profile processing, etc. Our engineer helps customers to design railroad lines according to requirements, and build mining railroad lines and crane moving lines. The technical support provided by Glory Rail can ensure that every rail we deliver provides optimum performance throughout its service life
If you are interested in this products, pls feel free to contact us, we will give you the quote in the shortest possible time!